Multipanel Economy 3mm Two Sided Shower Board Kit

Multipanel Economy 3mm Kits are manufactured using a maleable composite material with embossed grout lines that help keep your surface mould free with minimal maintenance.

It is imperative that panels are conditioned prior to fitting by laying them flat in a similar temperature/environment to that which they are to be fitted in for 2-3 days. This helps to remove any visible bow and helps with installation too.

Economy 3mm Kit Features

• Beautifully Made Metro Brick Effect Panels
• Completely Waterproof Panel Core
• Quick & Easy to Install 
• Easy to Clean & Maintain
• No Unsightly Grout Lines
• Classic Finesse Without the Stress

Economy 3mm Kit Contents

• 2 x 2440 x 1220mm Wall Panels
• 1 x Type J - 3mm Internal Corner
• 2 x Type F - 3mm End Cap
• 2 x Tubes Panel Adhesive
• 1 x Tube of Panel Sealant

Be sure to follow the installation instructions provided in the link below to ensure your fit is covered by the manufacturers warranty.

Economy 3mm Installation Instructions

Please Note: The panels are made from a 3mm malleable material. Most panels exhibiting a degree of bowing or a twist can be used and are not faulty.

The initial storage and method of fixing should help pull the panels flat against the wall. If a slight bow makes it difficult for the panel to sit flush with the fixing surface, we would recommend placing something soft on the panel to protect the finish from scratching and applying pressure to the panel until the adhesive grabs and the panel stays in place.