20mm PVC Cove Former Vinyl Floor Trim - Black - Genesis

20mm PVC Cove Former Vinyl Floor Trim - Black - Genesis

Genesis KCOV cove former provides a neat cove allowing floor coverings to be dressed up the wall to form a skirting, whilst supporting the floor coverings at the weakest point.

Installation Instructions:

1. Ensure the substrate is dry, smooth and free from any contaminants. 
2. Lay the lengths of cove former around the perimeter of the area and using a sharp knife or hacksaw cut the lengths to size. 
3. All external and internal corners should be cut with the aid of a mitre block. 
4. Once cut, remove the profile away from the wall and lay face down. 
5. Apply a proprietary contact adhesive to the back of the profile and leave to dry. 
6. Apply the same adhesive to the wall (approx 20mm from the floor up) and to the floor (approx 20mm from the wall into the floor) and leave to dry. 
7. Once the adhesive is touch dry, place the profile in position, apply firm pressure along the full length to ensure full contact is made by the profile between the wall & floor.